Answers

  • 0
  • 0

What is Tantalum Carbide TaC Powder?

Koalas were declared endangered in eastern Australia on Friday, with more and more koalas dying from disease, habitat loss, and other threats. Earlier, the koala was considered a vulnerable species, and the Commonwealth Department of the Environment changed its protection level to endangered on the east coast of Queensland, New South Wales, and the Australian Capital Territory. Many koalas in Australia are infected with chlamydia. The disease can cause blindness, infection, and infertility. Last year, the Australian Koala Foundation said Australia had lost about 30 percent of its koala population in the past three years. Without immediate action, the species could become extinct by 2050.
Unlike koalas, which are on the brink of extinction, the market demand for Tantalum Carbide powder will grow substantially.

Introduction to Tantalum Carbide TaC Powder
Tantalum carbide or TaC is a light brown metallic cubic crystal powder, belonging to the sodium chloride cubic crystal system. The density is 14.3g/cm3.
Insoluble in water, insoluble in inorganic acid, soluble in hydrofluoric acid and nitric acid mixed acid and decomposition. It has strong oxidation resistance and is easily melted and decomposed by potassium pyrosulfate. Has high conductivity, and resistance of 30Ω at room temperature, showing superconductivity.
Tantalum carbide is used for powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutting tools, molds, and additives for wear and corrosion resistance structural components to improve the toughness of alloys. The sintered body of tantalum carbide shows a golden color and can be used as watch decoration.
 

Tantalum Carbide TaC Powder Properties
Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance brown to dark brown powder
Melting Point 3850°C
Boiling Point 4780-5470 °C
Density 14.3-14.7g/cm3
Solubility in H2O insoluble
Exact Mass 192.948

 

Tantalum Carbide TaC Powder Cas 12070-06-3
 

 

Preparation Methods of Tantalum Carbide TaC Powder
1. In industry, mix tantalum pentoxide powder with solid carbon ball mills, get the mixture reduced and carburized in a non-oxidizing atmosphere (mainly vacuum and argon atmosphere) at 1700, to prepare TaC powder with a particle size greater than 2μm.
2. Nano tantalum carbide powder was prepared by heat treatment in the non-oxidizing atmosphere with the liquid precursor method. 5mL of anhydrous ethanol was added into a small beaker containing 0.50gTaCL5, and stirred evenly with a glass rod. Then, it was put into an ultrasonic cleaner with a heating temperature of 55 and a working frequency of 40kHz, ultrasonic power was 80W. After ultrasonic oscillation for 5-10min, 0.10g nano-activated carbon was added, and the oscillation continued for 15-20min. Pour it into the crucible and coat it evenly on the inner wall, and dry it with a hot fan. The crucible with the sample was placed in a vacuum hot pressing furnace, and high-temperature treatment was carried out at 1300 in a vacuum of 100Pa or hydrogen atmosphere; Or at 1400 in argon atmosphere, holding time is 0.5h, the heating rate is 20/min. After the experiment, brush the products in the crucible with a brush. 
3. Heat in the air to convert to tantalum pentoxide. Can be fused with potassium pyrosulfate.  By metal tantalum and carbon or tantalum pentoxide and black in an inert atmosphere heated to 1900 reaction prepared.
4. Use tantalum pentoxide and methane as the reaction gas, argon as the carrier, using silicon carbide resistance from the external radiation heating, carbonization, or tantalum pentoxide mixed with carbon black, pressurized powder molding, heating in hydrogen or vacuum.
 

Applications of Tantalum Carbide TaC Powder
It is widely used in industry and the military. In cemented carbide, it is widely used as a kind of additive. Its main function is to improve the high-temperature strength of cemented carbide and inhibit the growth of tungsten carbide particles. 
In cutting tools, used as a hard coating to increase the chemical resistance and wear resistance of the base metal; 
In the military, it can be used as a coating for jet engine turbine blades and rocket nozzles, which can significantly improve their ablative resistance and prolong their service life. 
Because of its good conductivity, it can also be used as electrode material, using electric discharge wire cutting into complex shapes; 
And as the second phase particle reinforced metal matrix composites, it can be used in aerospace, metallurgy, building materials, electric power, hydropower, mining, and other fields.
 

Main Supplier of Tantalum Carbide TaC Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide TaC powder, please feel free to contact us and send an inquiry. ([email protected])

Europe's immediate goal of reducing its dependence on Russian gas in response to the conflict with Ukraine presents a rare opportunity for the United States, the world's largest gas producer. America's LNG exporters have made a fortune this time. Investors are bullish on the future of natural gas, as evidenced by the recent record high share price of Energy company Chenier.  

But the outlook for more than a dozen new LNG projects is highly uncertain as construction costs rise, US gas prices soar and climate policymakers seek to move away from a long-term reliance on fossil fuels. Even the most advanced projects can take years to become operational.  

Currently, the total U.S. LNG Tantalum Carbide powder are expected to continue to rise in the future.

Inquery us

Our Latest Answers

Function and overview of titanium carbide TiC powder

Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…

Characteristics of calcium silicide CaSi2 powder

Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer. Calcium silicide is used in the manufacture of special metal alloys, for example for phosphorus removal and as a deoxidizer.…

How is Niobium Carbide NbC powder produced?

Niobium carbide (NBC and Nb2C) is a very hard refractory ceramic material, widely used in refractory high temperature materials and cemented carbide additives.…